![]() The speaker is connected direct to the SP-jack on the front of the Control-RRC with a 3.5 mm stereo plugg. I make it by your self make the cable as short as possible to prevent it from picking up HF. If the radio have a circular microphone jack you need to make a adapter cable by your self or buy one from our webshop. If you have a microphone with a circular connector like HM-36 you can buy a adapter cable OPC-589 from ICOM or make one by your self.Ä«etween the Radio-RRC AUX/MIC jack and the radios microphone jack you can connect a standard patch cable if the radio have a RJ-45 jack. ![]() The microphone can be connected direct to the Control-RRC AUX/MIC jack, if you have a mic with RJ-45 connector like the HM-103. The 3.5 mm plug is connected to the radio CI-V jack. The cable should have a 4/6 modular connector in one end and a 3.5 mm stereo plug in the other end. From the Radio-RRC:s TTL jack to the radios CI-V jack you need to make a simple cable. When you want to control ICOM radios with the RRC-1258MkII via the CI-V protocol, you connect a standard RS-232 cable between the PC and the COM 2 connector on the back of the Control-RRC.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |